CON-844 Pulse counter
SPARK DETECTORS CON-844 Pulse counter Counts the number of alarms and extinguishing operations. 5 digits, manual reset. Wall mounting. Power voltage 24Vdc 0,55W. DATASHEET
LAC-843 Alarm lamp
SPARK DETECTORS LAC-843 Alarm lamp Lamp with built-in 1Hz flasher. Wall mounting. IP65 protection. Power voltage 24Vdc 3-5mA. DATASHEET
UGN-820P Flat jet spray nozzle
SPARK DETECTORS UGN-820P Flat jet spray nozzle 90° flat jet, spray jet in line with water entry. To be mounted on surface of ductwork. Used for special applications. Coupling 3/4″ gas male, case material brass. DATASHEET
UGN-820A Axial spray nozzle
SPARK DETECTORS UGN-820A Axial spray nozzle 70° hollow cone jet, spray jet in line with water entry. To be mounted on surface of ductwork. It is used in applications where it is necessary to avoid bulky in the duct because of the type and the quantity of transported material (eg fibers, paper, leather). Coupling 3/4″…
FIL-817 Strainer for water solenoid valve
SPARK DETECTORS FIL-817 Strainer for water solenoid valve To be installed before EVS-811 solenoid valve in order to stop andy dirt flowing inside the main water line. Coupling 3⁄4” female. DATASHEET
APU-874 Air purging unit
SPARK DETECTORS APU-874 Air purging unit The air purging unit model APU-874 is a mechanical unit designed to keep clean the window of the mounting unit SAM-871 and protect the spark detector RIV-601P/S from the high temperatures of the duct (max 120°C) by means of an air jet. Brass universal 3/8”M air fitting, Parker (female…
LAM-612P External test lamp unit IP66 ATEX II 3D
SPARK DETECTORS LAM-612P External test lamp unit IP66 ATEX II 3D Designed to test the RIV-601P/S spark detector window integrity against dust and dirt build-up. Its use is recommended when internal test cannot be reliable bacause of window being covered or darkened. It is mounted like a spark detector, using the same SAM-871 mounting unit,…
PAC-846 Water flow switch ATEX II 3D
SPARK DETECTORS PAC-846 Water flow switch ATEX II 3D Designed to monitor the spray water flow in the spray nozzle during the extinguishing operation. Installed between the solenoid valve and the spray nozzle, will signal any water leakage due to solenoid valve malfunction. Brass tee coupling 1/2″ female (3/4″ adapters separately supplied). Changeover contact 1A…
EVS-811 Water solenoid valve ATEX II 3D
SPARK DETECTORS EVS-811 Water solenoid valve ATEX II 3D Opens water flow to the extinguisher spray nozzle. Coupling 3/4″ female. Weatherproof protection with IP65 connector. Power voltage 24Vdc 6.9W. DATASHEET
SNA-808L Alarm sounder beacon
SPARK DETECTORS SNA-808L Alarm sounder beacon Audible visual alarm. Indoor and outdoor use. IP65 protection. Power voltage 24Vdc 16mA 0,4W. DATASHEET