ATEX SAFETY SYSTEM NOT RETURN VALVES ATEX FROM Ø 100 TILL Ø700 The not return valves are the solution to isolate the environments in case of explosion in the equipment of suction stopping the explosive effect in the suction’s line. ATEX Certified EN 16447 DATA SHEET
ATEX SAFETY SYSTEM ANTI EXPLOSION PANEL RE-SHUTTLED ATEX Anti explosion panel re-shuttled DATA SHEET
ATEX SAFETY SYSTEM ANTI EXPLOSION PANELS ATEX The anti explosion panels ATEX are safety devices, the solution to avoid the damages to people and things against the explosion pressure relief in box, silos, or closed volume with dusts, liquis, fogs and gas explosion. Certified with the EN14797 norm DATA SHEET
TEMPERATURE SENSOR ALARM SOUNDER SNA-808 SPECIFICATIONS Two-tone electronic sounder. Indoor and outdoor use. IP65 protection. Power voltage 24Vdc 16 mA 0,4W. Operating duty cycle continuous. Operating temperature -25 +80 °C. Dimensions Ø 93 x H 93mm. Packaging 100x100x110mm. Weight 260 g (300 g with packaging). DATA SHEET
SPARK DETECTORS CON-844 Pulse counter Counts the number of alarms and extinguishing operations. 5 digits, manual reset. Wall mounting. Power voltage 24Vdc 0,55W. DATASHEET
SPARK DETECTORS LAC-843 Alarm lamp Lamp with built-in 1Hz flasher. Wall mounting. IP65 protection. Power voltage 24Vdc 3-5mA. DATASHEET
SPARK DETECTORS UGN-820P Flat jet spray nozzle 90° flat jet, spray jet in line with water entry. To be mounted on surface of ductwork. Used for special applications. Coupling 3/4″ gas male, case material brass. DATASHEET
SPARK DETECTORS UGN-820A Axial spray nozzle 70° hollow cone jet, spray jet in line with water entry. To be mounted on surface of ductwork. It is used in applications where it is necessary to avoid bulky in the duct because of the type and the quantity of transported material (eg fibers, paper, leather). Coupling 3/4″…
SPARK DETECTORS FIL-817 Strainer for water solenoid valve To be installed before EVS-811 solenoid valve in order to stop andy dirt flowing inside the main water line. Coupling 3⁄4” female. DATASHEET
SPARK DETECTORS APU-874 Air purging unit The air purging unit model APU-874 is a mechanical unit designed to keep clean the window of the mounting unit SAM-871 and protect the spark detector RIV-601P/S from the high temperatures of the duct (max 120°C) by means of an air jet. Brass universal 3/8”M air fitting, Parker (female…
